A Highlander job is done the way I'd do it for my own house — and if it's outside a handyman's scope, I'll tell you and hand you the right licensed pro.
I'm a one-man shop, which means the guy who answers the phone is the guy who shows up with the toolbox. There's no dispatcher, no rotating crew, and no apprentice sent out on a job I haven't looked at myself. Every category below — carpentry, drywall, flooring, fixtures, exterior repair, and the small jobs that come up in every house — gets my hands and my standard, whether it's a two-hour fix or a full day's work.
That standard comes from 25 years in the trades, 20 of them running my own renovation company, J.CO Renovations, known around here for kitchens and baths. I've framed additions, built custom cabinetry, and bid jobs worth more than most cars. Now I've scaled that same experience down to the repairs and small builds a house actually needs day to day — and I bring the same care to a drywall patch that I used to bring to a full remodel.
Honesty is the other half of it. If a job is smaller than you feared, I'll tell you and charge you accordingly. If it's outside what a handyman should touch — new electrical wiring, plumbing beyond a fixture swap, roofing, or anything structural that needs an engineer's eyes on it — I'll say so up front and hand you a licensed pro I trust, before you've paid me a dime for guessing. Below is everything I handle personally, grouped the way the work actually comes up around a house.
Most calls end up covering more than one item on this list — a stuck door leads to a look at the trim, a grab bar installation turns into a quick fixture swap while I'm already in the bathroom. Tell me everything on your list when you call and I'll usually knock it out in one visit instead of four separate trips.
Inside the house is where most calls start — the drywall crack you've been meaning to patch, the floor that squeaks in the hallway, the small kitchen or bath repair that's been on the list for a year.
Holes, cracks, texture matching, and popcorn ceiling removal, patched clean.
LVP and laminate install, tile and plank repair, and squeaky floors run down and fixed.
Small jobs and repairs — tile, cabinet hardware, minor plumbing — done to a full-remodel standard.
Tennessee and NC High Country weather is hard on a house from the outside in. Siding, gutters, decks, fences, and the wash-down that makes it all look new again — exterior work I handle without needing a full remodel crew.
Repairs blended into existing siding, plus small new siding work.
Minor repair and fascia work — routine cleaning refers to Watauga Gutters.
Structural repair for decks and porches, with small new builds by request.
Pickets, sagging gates, and posts reset and squared up.
Driveways, decks, and siding prep before paint or repair.
Sticking doors, worn hardware, weatherstrip, and full replacements.
Carpentry is where I started 25 years ago and it's still where I'm most at home — trim, rot repair, custom shelving, and the caulking and mounting work that keeps a house tight and finished.
Structural and aesthetic repair, custom shelving, and trim carpentry.
Tub and shower re-caulk, window and door weatherstrip, sealed gaps.
TVs, shelves, mirrors, art, curtain rods, and blinds hung level and secure.
Flat-pack and delivered furniture assembled correctly and checked for wobble.
Fixture swaps, appliance hookups, and the safety upgrades that let someone age in place comfortably — small, specific jobs I handle personally, with a clear line where I hand off to a licensed electrician or plumber.
Bathroom safety bars, thresholds, and small ramps installed solid.
Dishwasher, garbage disposal, and over-range microwave installs.
Fixture and device changeouts only — new wiring runs go to a licensed electrician.
Faucet, sink, and toilet swaps — anything past a fixture goes to a licensed plumber.
Before you hire your next contractor, have someone in your corner who's built these for 25 years.
See how A Contractor in Your Corner worksWhat's the difference between a handyman job and a contractor job?+
Repairs, small builds, and fixture work are handyman scope. Full remodels, additions, or anything needing a permit and licensed trades is contractor territory — Jeff will tell you which is which.
Can you bundle multiple small jobs into one visit?+
Yes — most calls end up covering a short list of jobs in one visit. Tell me what's on your list when you call.
Do you offer emergency or same-week repairs?+
Call and ask — I'll tell you honestly what my schedule allows.
What don't you do?+
New electrical wiring, plumbing beyond fixtures, roofing, and HVAC. I'll name the trade and connect you with someone I trust.